Scoot Boots are a superior hoof boot. They are constructed of a strong material called thermoplastic urethane (TPU). TPU has high abrasive and shock absorbing qualities making them extremely robust and lightweight. They won’t get soggy or heavy when riding through mud and wet terrain. 

Some of their superior features and benefits are:

• Easy on and easy off 
• Superb strength over all types of terrain
• Superior traction 
• No cables or velcro 
• Great ventilation and breathability for hot climate riding 
• Excellent drainage
• Easy to clean 
• Fit hooves securely throughout a 5-6 week trimming cycle 

Scoot Boots are a healthier, natural barefoot alternative to help protect sensitive horses’ hooves. Scoots allow horses to travel over any type of terrain no matter how harsh, with comfort and support. 

Go to our Online Store for more information.

Scoot Slims are a superior hoof boot. They are constructed of a strong material called thermoplastic urethane (TPU). TPU has high abrasive and shock absorbing qualities making them extremely robust and lightweight. They won’t get soggy or heavy when riding through mud and wet terrain. Scoot Slims function exactly like our regular Scoot Boots except they are more suited to narrower hind hooves or slightly contracted hooves. Scoot Slims allow for a hoof to lock into the boot. This provides extra security as well as good drainage and ventilation. 

Some of their superior features and benefits are:

• Easy on and easy off 
• Superb strength over all types of terrain 
• Superior traction 
• No cables or velcro 
• Great ventilation and breathability for hot climate riding 
• Excellent drainage
• Easy to clean 
• Fit hooves securely throughout a 5-6 week trimming cycle 

Scoot Slims are a healthier, natural barefoot alternative to help protect sensitive horses’ hooves. Scoot Slims allow horses to travel over any type of terrain no matter how harsh, with comfort and support. 

Go to our Online Store for more information. 

Scoot Slims function exactly like our Scoot Regulars except they are more suited to oval-shaped hooves, slightly contracted hooves and narrow rear hooves.

Scoot Regulars and Scoot Slims are the same length, but Scoot Slims are 10mm (⅜”) narrower.

If your horse's hooves are wider than they are long, your horse will most likely require Scoot Regulars. If your horse's hooves are longer than they are wide, your horse will most likely require Scoot Slims. 

Use our Free Sizing Service to size up your horse. 

A pair of Scoot Boots does not have a left and a right boot which makes booting up so much easier!

A pack of Scoot Boots contains a pair of Scoots assembled with black Front Straps and Pastern Straps. Your Scoots will also come with a pair of Trail Gaiters, spare Hardware, 2 spare Front Straps and 2 spare Pastern Straps, along with instructions on how to care for your Scoots and check your horse’s fit. 

Go to our Online Store for more information.

The Scoot Boot product range has excellent traction. The Scoot Boot tread pattern is designed to provide traction for the majority of riding conditions such as mud, grass, sand, rocks, and more! 

Ice Studs may be used to increase traction in icy conditions. 

Yes, Scoot Boots have excellent drainage. Their design, which features open side vents, an open back and an open toe, enables water or mud to drain away easily and quickly.

Scoot Boots are extremely durable. Scoot Boots last an average of 1,000 kilometres (600 miles). 

The durability of Scoot Boots will depend on the type of terrain you ride on and the gait of your horse. 

If your horse has a floating movement and you only ride occasionally, then Scoot Boots will last several years. If your horse scuffs and twists its feet, then Scoot Boots will wear slightly faster.

Scoot Boots are excellent on all types of terrain including mud, sand, water, rocks, desert and snow.

Due to their design, Scoot Boots have excellent ventilation and drainage. Any debris that enters the boot, such as sand or pebbles, will filter straight back out.

Scoot Boots are very lightweight. A single Scoot Boot weighs approximately 250 grams (9 ounces) depending on its size.

Your horse’s behaviour will be able to help you determine if it requires further support and protection. If your horse is unwilling to step over stony, sharp surfaces and is footsore after a ride, it will most likely require some extra protection. 

Horses transitioning to barefoot may also require Scoot Boots once their shoes have been removed to protect their newly bare hooves from becoming sore. 

Go to our Blog Page for more information on transitioning your horse to barefoot.

Unfortunately, no. However we do produce Scoot Regulars in sizes 10 and 11, which may suit larger horses such as a Clydesdale x.  

Use our Free Sizing Service to size up your horse.

Yes! Our smallest size is an M00. 

We recommend using a stockist to size up for our smaller Scoot Boot sizes. 

Visit our Stockist Locator to find a Scoot Boot Approved Stockist near you.

The largest size in our range is the Scoot Regular size 11. The largest size of our Scoot Slims is 7 Slim.

Use our Free Sizing Service to size up your horse.

The smallest size of our regular Scoot Boots is size M1. The smallest size of our Scoot Slims is 0 Slim. 

Use our Free Sizing Service to size up your horse.

Alternatively, visit our Stockist Locator to find a Scoot Boot Approved Stockist near you.

Scoot Boots are successfully used for rehabilitation for all kinds of pathologies including inflammation, diseases, infections and injuries of the hoof and lower limbs. 

Horses can be turned out 24/7 in Scoot Boots due to their superior breathability and drainage. Good breathability is vital in preventing a build-up of fungus and bacteria. The excellent drainage capabilities of the Scoot Boot means that the horse’s natural hoof heat will dry out any excess moisture, ensuring the hooves remain dry. 

Scoot Boots have an open toe design to help relieve toe pressure. This is a necessity for laminitic horses. We also recommend using Scoot Pads if your horse has sensitive soles.

Go to our Blog Page for more information on Scoot Boots for rehabilitation.

Yes, Scoot Boots can be worn 24/7 with regular maintenance checks. 

Due to their design, Scoot Boots have excellent drainage capabilities, meaning that the horse’s natural hoof heat will dry out any excess moisture, ensuring the hooves remain dry. 

Go to our Blog Page for more information on Scoot Boots for rehabilitation.

Scoot Boots are not designed to be worn over metal shoes but they can be worn over sliders to assist the horse during transportation, turnout or exercise. 

Horses need to be able to feel the ground to avoid potential injury; which is why horses carefully walk over unstable, rocky terrain.

Yes, however your horse’s hooves must be correctly trimmed and maintained to securely fit Scoot Boots. 

Go to our Blog Page for more information.

Absolutely! The Scoot Boot fits on the hoof, neatly under the feathers, and the pastern strap secures around the pastern, over the top of the feathers. 

Use our Free Sizing Service to size up your horse.

The Scoot Mud Strap is the ultimate riding accessory for those who like it extreme. It is a long, double-sided strap that is fitted between the rear vertical shank of the boot under the trail gaiter, and over either side of the pastern. It is secured by the Mud Strap Collar and the Front Straps. 

The Mud Strap is made from an extremely robust TPU which stretches when placed under pressure, and if secured correctly, won’t affect the horse’s pastern. 

The Mud Strap has two purposes:

1. Provides ultimate security when riding in extreme conditions
2. Can be used to assist hard-to-fit hooves. For example, if your horse is in between sizes, the Mud Strap can be fitted to a larger sized Scoot Boot and provide security. However you must have the correctly sized Mud Strap. The Mud Strap can also be used to obtain a more secure fit if your horse requires Scoot Pads due to sensitive soles and consequently needs a larger sized Scoot Boot.

Go to our Online Store for more information.

To put on a Scoot Mud Strap:

1. Pass both sides of the strap through each side of the rear vertical shank of the Scoot Boot, under the trail gaiter.  Make sure the raised ends of the Mud Straps are facing towards the front of the Scoot
2. Thread one end of the Mud Strap through the Mud Strap Collar
3. Slip your horse’s hoof into the Scoot and place it on the ground
4. Bring each end of the Mud Strap around the front of the Scoot, with the strap going on either side of the pastern
5. Slip the second end of the Mud Strap through the Mud Strap Collar, then push the Mud Strap Collar upwards to the top coronet
6. Slide each end of the Mud Strap, one at a time, onto the bottom Front Strap
7. Secure both Front Straps

Check the fit of the Mud Strap by sliding your finger between the Mud Strap and your horse’s pastern. If it is feeling too tight, you may need a larger size.

Both the Pastern Strap and the Mud Strap are a source of securement for Scoot Boots. 

The Pastern Strap is a long strap secured on each side of the Scoot and placed over the pastern. It is designed to help prevent the Scoot from being pulled off due to an overreach or being sucked off when riding through mud. However, it is not intended to be the primary source of securement. Each pair of Scoot Boots comes assembled with Pastern Straps and 2 extra Pastern Straps. 

The Scoot Mud Strap is the ultimate riding accessory for those who like it extreme. The Mud Strap provides unparalleled security in deep mud and when riding over rough terrain. It is a long double-sided strap that is fitted between the rear vertical shank of the Scoot and over either side of the pastern. It is secured by the Mud Strap Collar and the Front Straps.

Both straps are made of an extremely robust material called thermoplastic urethane which stretches when placed under pressure, and when correctly secured, won’t affect the horse’s pastern. 

Go to our Online Store for more information.

The Pastern Strap and the Mud Strap can be worn at the same time if the rider chooses, but it is not necessary.

The Mud Strap Collar is a small, rectangular collar made out of a flexible and robust material, thermoplastic urethane, that is used to secure the Mud Strap onto the Scoot Boot.

Go to our Online Store for more information.

The Mud Strap Sleeve is a thin, flexible and soft PVC tube that can be attached to a Mud Strap for horses that have sensitive skin around their pastern, or if the Mud Strap is too loose.

Go to our Online Store for more information.

To put on the Mud Strap Sleeve:

1. Remove the Mud Strap Collar from the Mud Strap
2. Apply a small amount of lubricant (such as cooking oil) to the end of the Mud Strap
3. Feed the Mud Strap through the Mud Strap Sleeve tubing
4. Secure the Mud Strap to the Scoot

The Pastern Strap is a long strap secured on each side of the Scoot and placed over the pastern. It is designed to help prevent the Scoot from being pulled off due to an overreach or being sucked off when riding through mud. However it is not intended to be the primary source of securement. 

The Pastern Strap is made of very strong thermoplastic urethane  and is designed to stretch when placed under pressure. The strap will not affect the horse’s pasterns if secured correctly. It also has several holes to provide the correct setting, depending on the thickness of the horse’s pasterns. To set the strap at the correct length, make sure your horse is standing upright with its legs at 90 degrees. Once secured, you should be able to place one finger under the strap at the front of the pastern. 

Each pair of Scoot Boots comes assembled with Pastern Straps and 2 extra Pastern Straps. 

Go to our Online Store for more information.

The Pastern Strap Lock is a small nylon lock that slides onto the Pastern Strap and attaches to the knob hook on each side of the Scoot Boot.

It is designed to provide extra security when riding through muddy conditions or thick vegetation. 

Go to our Online Store for more information.

Front Straps are two small straps that close the front of the Scoot. Front Straps are designed to make the application and removal of your Scoot Boots simple and practical. 

Front Straps are made of thermoplastic urethane which has excellent strength and flexibility, and can be easily stretched across the front of the Scoot Boot.

Go to our Online Store for more information.

To change the Front Straps:

1. Pull the Front Straps sideways towards the secured position. Stretch the strap and maintain the tension and pull it back over itself until the straps release from the rivets
2. With a pair of wire cutters, cut the head of the rivet off the front of the Scoot Boot
3. Fit the Scoot Boots with four new knob hooks from the Scoot Boot Hardware Pack and secure them with a small amount of low strength Loctite Glue.

Secure the new Front Straps on the new hardware on the Scoot Boot

Front Straps can easily be attached/unattached using a hoof pick or a pair of pliers.

Scoot Boot Trail Gaiters are easy to fit neoprene gaiters that are secured to the back of the Scoot Boot with velcro. 

The Trail Gaiter protects the top of the horse’s heel bulb to prevent rubbing on horses with sensitive skin, or for horses travelling long distances. We recommend using Trail Gaiters when your horse is initially getting used to Scoot Boots. 

Please ensure the gaiters are attached in the correct position to avoid debris collecting between the bulbs and the Trail Gaiter.

All new Scoot Boots come with a pair of Trail Gaiters.

Go to our Online Store for more information.

To put on Trail Gaiters:

1. Open up the Trail Gaiters 
2. Fold the Trail Gaiter over the heel bulb straps of the Scoot Boot
3. Velcro both ends of the Trail Gaiter together under the heel bulb straps
4. Ensure that the Scoot Boot Trail Gaiter logo is facing the back on the outside of the Scoot Boot

Endurance Gaiters are neoprene gaiters that are fitted under the hoof and reach up the rear coronet area and around the pastern. 

The Endurance Gaiter provides protection for the lower back of the pastern and the rear coronet area to prevent rubbing for sensitive skinned horses and for endurance horses travelling long distances. 

Go to our Online Store for more information.

To put on Scoot Boot Endurance Gaiters:

1. Insert the Endurance Gaiter pad into the Scoot Boot
2. Fold the neoprene material back over the Scoot Boot and hold in place with your thumb
3. Place the Scoot Boot onto your horse’s hoof by slipping the toe of the hoof into the toe of the Scoot and then give the sole of the Scoot a tap so the back straps slip over the heel bulbs. Hold the gaiter while you do this to make sure it doesn’t slip to one side
4. Check the pad is sitting in the centre of the Scoot Boot. It shouldn’t be too far forward or bent up behind the back strap
5. Make sure the Endurance Gaiter is covering all parts of the heel bulb, the neoprene material should sit smoothly without creases
6. Secure the velcro firmly around the pastern
7. Check there is no gap between the Endurance Gaiter and the pastern to reduce the chance of debris falling inside the back of the Endurance Gaiter

Horses will usually require Gaiters if they have sensitive skin or are travelling long distances. There are two types of Scoot Boot gaiters, Trail Gaiters and Endurance Gaiters. 

The Trail Gaiter protects the top of the horse’s heel bulb to prevent rubbing on sensitive skinned horses, or for horses travelling long distances. We recommend using Trail Gaiters when your horse is initially getting used to Scoot Boots. 

The Endurance Gaiter protects the lower back of the pastern and the rear coronet area to prevent rubbing for sensitive skinned horses and for endurance horses travelling long distances.

Scoot EVA Gaiter Tape is a soft and protective adhesive tape that can be used as an economical, homemade gaiter to protect your horse’s heel bulb and prevent rubbing. 

It can be used in conjunction with, or instead of Scoot Boot Trail Gaiters. 

Go to our Online Store for more information.

To apply Scoot EVA Gaiter Tape to Scoot Boots, you need a roll of 40mm (1.5 inches) wide Scoot EVA Tape, and a roll of duct tape:

1. Cut a 100mm (4”) piece of EVA Gaiter Tape 
2. Cut a piece of duct tape of the same length and cover the foam part of your EVA Gaiter Tape. This protects the EVA Gaiter Tape and decreases the chance of rubbing
3. Peel off the back of the EVA Gaiter Tape 
4. Place the tape on the back of the Scoot’s heel strap and fold it back firmly on itself

The Scoot Anti-Slip Shim is a non-slip Scoot accessory that can be inserted into the front of the Scoot Boot between the hoof and the Scoot. 

Anti-Slip Shims can be used as a filler to provide a firmer fit when the hoof is in between Scoot Boot sizes or the hoof has shrunk due to dry conditions. It can also provide extra security when the hoof gets wet and becomes slippery. 

Go to our Online Store for more information.

Scoot Pads are made of thermoplastic urethane that fit in the sole of Scoot Boots.

Scoot Pads provide relief to horses with sensitive soles and give a firmer fit when the hoof is in between Scoot Boot sizes.  

We only recommend using Scoot Pads if necessary. Most horses do not require pads in Scoot Boots. Using Scoot Pads may affect the fit of your Scoots and you may need to go up a size to accommodate pads. Please contact our Sizing Team at sizing@scootboots.com if you need any assistance with fitting your Scoot Pads.

Go to our Online Store for more information.

Yes, Scoot Pads can be used in Scoot Slims. 

As Scoot Boots are the same length as Scoot Slims, the width of the Scoot Pads need to be cut down to fit in the sole of the Scoot Slims. You can use scissors, a knife or a cutting blade.

Scoot Ice Studs are small metal studs inserted into the bottom of Scoot Boots to enhance your horse’s traction on slippery surfaces, such as ice. 

If you insert Ice Studs into the bottom of your Scoot Boots, you will not be able to return your Scoot Boots for a refund or exchange. 

Go to our Online Store for more information.

To insert Ice Studs into the bottom of Scoot Boots:

1. Select the required position to insert the Ice Studs. You need an equal amount of Ice Studs on each side of the Scoot Boot and in the same position
2. Drill a starting hole with a handheld battery drill with a 3/16” drill bit, 5mm (1/4”) deep into the Scoot. Do not drill completely through the sole of the Scoot
3. Insert the Ice Stud tool from the Scoot Ice Studs Pack into the drill and slowly screw the Ice Studs into the prepared holes made in the sole of the Scoot 
4. Ensure the head of the Ice Stud is sitting snug against the sole of the Scoot 

Remove Ice Studs from your Scoot Boots when they are not needed. To remove the Ice Studs, set the drill to reverse and slowly remove the studs. You can still use your Scoots without the studs and the removed Ice Studs can be used again.

If you insert Ice Studs into the bottom of your Scoot Boots, you will not be able to return your Scoots for a refund or exchange.

Scoot Skins are the ultimate glue-on boot for the performance horse. They are constructed of a very strong  thermoplastic urethane, making them extremely robust and lightweight (220g/8 ounces) They allow your horse to ride over the toughest of terrains while remaining comfortable. 

Scoot Skins are designed to protect horses competing in endurance. They are durable and flexible. They will give your horse unparalleled traction when riding in slippery conditions, so your horse can compete to the best of its abilities. 

Scoot Skins can be left on for a 5-6 week trimming cycle due to the sole flushing design. They can also be used as a rehab boot for all types of injuries, inflammation, diseases and infections. They will keep your horse’s hoof dry and comfortable and promote healing. 

Go to our Online Store for more information.

We recommend that gluing be undertaken by people who are skilled and experienced in gluing hoof boots.

To prepare Scoot Skins for gluing:

1. Put on protective eye equipment and latex gloves 
2. Attach a wire brush to a cordless drill and rough up the inside of the Skins until all factory polish has been removed
3. Clean the inside of the Skins with a rag and methylated spirits  
4. Cut a piece of cloth tape and stick it across the slots on both sides and the opening at the front on the outside of the Skins 

To glue Scoot Skins:

1. Use a heat gun or hair dryer to dry the hoof
2. Use the back of a rasp to rasp off any oil or dirt off the hoof wall 
3. Use a sanding block to sand off any remaining dirt or oil 
4. Clean off any loose particles from the hoof with a rag and methylated spirits 
5. Once the methylated spirits has dried, the hoof is ready for gluing 
6. Place a piece of masking tape over the vents on the outside of the Skins. This allows the glue to penetrate the area and form a plug
7. Check the fit of the prepared Skins on the hoof. It should be snug at the front of the Skins with the toe forward. On the side of the hoof, the Skins should sit below the hairline. On the back of the hoof there should be no excessive overhang of the heel bulbs 
8. Mark the centre of the hoof with a pencil so the Skins will be straight and centred when you glue them on
9. Fit the Adapter into the bottom of the  Shufit Glue and put it in the glue applicator
10. Remove the lid off the glue and attach the Mixing Tip
11. Test the glue before putting it in the Skins, it should turn a light grey colour
12. Generously apply the glue to each side, inside of the Skins
13. Place the hoof on a hoof stand 
14. Open the Skins
15. Lift the hoof and place one side of the Skins onto the hoof, and then place the other side onto it
16. Place the hoof back on the hoof stand and smooth out the glue 
17. Wrap the hoof in plastic wrap and hold the hoof above the ground for 2-3 minutes

To remove Scoot Skins:

1. Separate the Skins from the hoof wall by placing a flat-head screwdriver in between the Skins   and the hoof wall starting at the back of the Skins and gently working around the Skins 
2. Pick the hoof up and pull the Skins off
3. Clean any debris out from the bottom of the hoof with a hoof pick
4. Place the hoof on a hoof stand
5. Use a rasp and sanding block to remove any excess glue off the hoof wall

The hoof is now ready to be trimmed.

Scoot Skins can be left on for a 5-6 week trimming cycle without a build-up of bacteria under the hoof.

Due to their design, Scoot Skins are self-cleaning and the entire sole of the hoof can be flushed out and medicated. This special feature saves the effort and expense of having to remove the Scoots  to apply medicated hoof packing.

Our Scoot Boot range is the recommended form of hoof protection for the majority of riding disciplines. Scoot Skins are a glue-on boot specifically designed for endurance. 

Scoot Boots are a healthier, natural, barefoot alternative to metal shoes. Their purpose is to help protect sensitive horse’s hooves to allow them to ride over any type of terrain, no matter how harsh, with comfort and support. 

Scoot Skins are the ultimate glue-on boot for the performance horse. They are specifically designed for endurance riders who ride 80 kilometres - 160 kilometres (50 miles - 100 miles) and want additional security. Scoot Skins are also recommended for  use in disciplines where hoof boots are not permitted. 

Go to our Online Store for more information.

The Shufit Glue Kit is made up of one 150ml (5 ounces) Shufit Glue, one Adapter, and two Mixing Tips.

The Shufit Glue Kit is used to glue on our Scoot Skins to your horse’s hooves for endurance riding. 

You will need a dispenser unit to apply the glue to the Scoot Skins. You can purchase this from your local hardware store.

Go to our Online Store for more information.

The shelf-life of Shufit Glueis approximately 12 months if stored correctly. It is recommended that Shufit Glue is stored at a moderate temperature when not being used.

One 150ml (5 ounces) tube of Shufit Glue will glue 1 pair of Scoot Skins.

The Scoot Boot Hardware Pack comes with 20 knob hooks. 

A Knob Hook is a piece of hardware that attaches the right side of the Front Straps and the Pastern Strap to the Scoot Boot. It is secured with a screw on the inside of the Scoot. They are used to keep the Front Straps and Pastern Strap in place while riding. They allow the straps to be removed easily for a colour change. 

Scoot Boots come with spare knob hooks and screws.

Go to our Online Store for more information.

A lot of concussion is applied to your Scoots when riding which can work the screws loose. 

Scoot Boot is phasing out Loctite applied to all screws during production. Prior to using your new Scoot Boots you will need to ensure the screws are tight and apply either Loctite 222 or nail polish. If you do not apply either of these products you will need to check your Scoot Boots regularly as the screws may work loose due to concussion when riding.   Loctite 222 can be purchased from hardware stores. A Scoot Hardware Pack can be purchased from our Online Store.

The Scoot Boot Riding Tights are black and yellow women’s riding tight. They are made from 83% polyester and 17% spandex with a silicone seat grip to ensure you stay in place while riding. 

There are 5 sizes available:

• XXS (AUS 6, US 2, UK 6)
• XS (AUS 8, US 4, UK 8)
• S (AUS 10, US 6, UK 10)
• M (AUS 12, US 8, UK 12)
• L (AUS 14, US 10, UK 14)

Scoot Boots and Scoot Boot accessories are made of thermoplastic urethane. Although this is a robust material, it can stiffen up when left in colder temperatures. 

We recommend storing your Scoot Boots and accessories inside during cold weather. This will keep the straps flexible and stretchy.

Scoot Boots are expertly designed to have excellent ventilation and breathability to prevent overheating.

Ensure that you have the correct size Scoot Pads for your Scoot Boots. Having the exact size greatly reduces the movement of the Scoot Pad in the Scoot Boot. If you want to apply glue to the Scoot Pad we only recommend rubber shoe glue. We recommend you dot glue around the Scoot Pad and not smear it across the entire surface, as this makes it too hard to remove.

Scoot Enduros are a superior hoof boot designed for long distance riding and to support barefoot mules. It has fully adjustable straps around the heel bulbs and accommodates various hoof types, especially high heels. 

Some of their superior features and benefits are:

• Robust, durable and lightweight 
• Excellent traction, flexible sole
• Open toe, sides and back with no bulb pressure 
• Excellent drainage and ventilation 
• Adjustable straps, no cables or velcro 
• Bulb Strap can be lengthened or shortened for full adjustability 
• Bulb Extender places the bulb strap in the correct position for underrun or high heels 
• 2 settings to adjust rear screws 

They are constructed of a strong material called thermoplastic urethane (TPU). TPU has high abrasive and shock absorbing qualities making them extremely robust and lightweight. They won’t get soggy or heavy when riding through mud and wet terrain.

Go to our Online Store for more information.

Scoot Enduros are best suited for long distance riding and supporting various hoof types, especially high heels. This is due to the fully adjustable straps around the heel bulb straps.

We recommend that Scoot Boots be used for jumping as it applies an enormous amount of torque to the rear of the boot. 

Scoot Boots offer far greater lateral and medial support to the rear compared to Scoot Enduros. 

If, however, our traditional Scoot Boots are not high enough to comfortably fit over your pony’s bulbs, then the Scoot Enduros can be used over lower heights on ponies.

A pack of Scoot Enduros contains a pair of Scoot Enduros assembled with black Front Straps, Mud Straps, Mud Strap Collars and Bulb Straps. 

Your Scoot Enduros will also come with a pair of Enduro Gaiters, 6 spare Mud Straps, 2 spare Bulb Straps, 2 spare Front Straps, 2 Bulb Strap Extenders, 4 Mud Strap Sleeves, spare Knob Hooks & Screws and spare Rear Rivets & Screws, along with an accessories guide and instructions to check your horse’s fit. 

Go to our Online Store for more information.

Scoot Enduros are available in sizes 00 to 3. 

Use our Free Sizing Serviceto size up your horse.

Scoot Enduros have been designed to be fully adjustable to accommodate various hoof types, especially high heels. 

The Bulb Strap can be either lengthened or shortened to correctly secure the Scoot Enduro over the heel bulbs. 

The Bulb Strap Extender aids with adjusting the fit if the Bulb Strap sits too low The Bulb Strap Extender lifts the Bulb Strap into a more secure position for underrun or high heels. 

Go to our Online Store for more information.

Scoot Enduros are extremely durable. Scoot Enduros last an average of 1,000 kilometres (600 miles). The durability of Scoot Boots will depend on the type of terrain you ride on and the gait of your horse. If your horse has a floating movement and you only ride occasionally, then Scoot Enduros will last several years. If your horse scuffs and twists its feet, then Scoot Enduros will wear slightly faster.

We are always working to accommodate a large size range for Scoot users. 

Keep an eye on our Facebook and Instagram pages!

In extreme riding the forces placed on Scoot Boots can at times, exceed the tensile properties of the TPU, especially around the heel strap area.  

The Scoot Enduros have been designed with an extra 1 mm of thickness added to this area. This decreases the possibility of the screws pulling through and strengthens this area. 

Go to our Online Store for more information.

Long Front Straps are two straps that close the front of the Scoot. They are 10mm (⅜”) longer than regular Front Straps to fit wider hooves or accommodate hoof pathologies. Front Straps are designed to make the application and removal of your Scoot Boots simple and practical. 

Front Straps are made of thermoplastic urethane which has excellent strength and flexibility, and can be easily stretched across the front of the Scoot Boot.

Please note, Scoot Boots already come equipped with regular Front Straps. 

Go to our Online Store for more information.

Both Front Straps and Long Front Straps are two straps that close the front of the Scoot. The Long Front Straps are 10mm (⅜”) longer than regular Front Straps to fit wider hooves or accommodate hoof pathologies. 

Please note, Scoot Boots already come equipped with regular Front Straps. 

Go to our Online Store for more information.

The Enduro Bulb Strap is a long strap secured on the back of each side of the Scoot Enduro over the heel bulbs. It is designed to be lengthened or shortened to correctly fit the shape of the hoof . 

The Enduro Bulb Strap is made of very strong thermoplastic urethane and is designed to stretch when placed under pressure. The Strap will not affect the horse’s heel bulbs if secured and adjusted correctly. 

An Enduro Bulb Strap Extender can also be used to help aid the positioning of the Enduro Bulb Strap. Each pair of Scoot Enduros comes assembled with Enduro Bulb Straps and has 2 extra Enduro Bulb Straps. 

Go to our Online Store for more information.

Scoot Boot offers a Free Sizing Service. If you use this free service, you get free shipping and free exchange if you purchase from us!

To take your Sizing Pictures, you need to:

1.      Ensure your horse has had a correct barefoot trim within the last 2 weeks. A barefoot trim requires a rolled toe, bevelled hoof wall, low heel and no flare

2.     Take four pictures of each hoof you want sized up:

i)             First image: Measure from the centre of the toe and down over the frog

ii)            Second image: Measure across the widest part of the hoof

iii)           Third image: Take a clear photo directly in front of the hoof

iv)           Fourth image: Take a clear photo showing the side of the hoof 

3.     Send your sizing pictures to our Scoot Boot Sizing Team by:

i)             Uploading them through our Website

ii)            Emailing them to sizing@scootboots.com

iii)           Messaging them on our Facebook Page

iv)           Sending them to us via live chat on our Website.

Go to our Sizing Page for more information.

Scoot Boot offers a Free Sizing Service. If you use this free service, we will give you free shipping and free exchange if you purchase from us!

You can send your sizing pictures to our Sizing Team four different ways:

1. Uploading them through our Website
2. Emailing them to sizing@scootboots.com
3. Messaging them on our Facebook Page, or
4. Sending them to us via live chat on our Website

Go to our Sizing Page for more information.

Yes, but we strongly recommend letting us size you with our Free Sizing Service.

We have found that when customers size themselves they often incorrectly measure their horse’s length measurement and size their horses too large, which leads to fitting issues. 

Due to this we always encourage customers to take advantage of our Free Sizing Service! Our experienced Sizing Team will advise on suitability and size, as well as give you free shipping on your order and free exchange on clean, unmarked boots.

Go to our Sizing Page for more information.

The majority of riders only use Scoot Boots on the horses’ front hooves. 

This is because the front end of the horse bears 60-70% of a horse’s body-weight during motion. The rear legs mainly propel the horse forward and experience significantly less direct weight-bearing. 

If you are riding endurance, riding over extreme surfaces or your horse’s hooves have not yet fully transitioned, you may require Scoots on all four hooves.

Go to our Blog Page for more information on transitioning your horse to barefoot.

A horse’s rear hooves are often narrower in shape compared to the front hooves, so they usually require a Scoot Boot Slim size. Our Scoot Slims function exactly like our Scoot Regulars except they are more suited to narrower back hooves and slightly contracted hooves. 

The majority of horses only require Scoots on their front hooves unless their hooves are being transitioned to barefoot, naturally sensitive or travelling long distances or over extreme terrain.

Absolutely! Due to their minimal design and no cables, ties or velcro,Scoot Boots are the quickest and easiest hoof boot to fit and size up. They are as easy to put on as slipping on a sandal!

When you receive your Scoot Boots, try them on to check sizing before you ride. Boot up on a dry and clean hoof, on a dry, clean and soft surface such as a large rubber mat or piece of carpet. This will prevent your Scoots from becoming dirty or marked. Only use one Scoot Boot to confirm the fit  for both of your horse’s hooves.

To confirm the fit of your boots check out our Fitting Page. Contact our Sizing Team at sizing@scootboots.com if you have any questions or you are unsure of the fit. 

If you think your Scoot Boots might be the wrong size after using our Free Sizing Service, contact our Sizing Team at sizing@scootboots.com.

If you think your Scoot Boots might be the wrong size after sizing up yourself, please go to our Frequently Asked Questions Page for instructions.

Please note that if you return dirty, damaged, scuffed or marked boots, you will incur a fee. For more information please go to our Shipping & Returns Page.

When you receive your Scoot Boots, try them on to check the fit before you ride. Boot up on a dry and clean hoof, on a dry, clean and soft surface such as a large rubber mat or piece of carpet. This will prevent your Scoots from becoming dirty or marked.

To fit your new Scoot Boots, you need to:

1. Ensure the Front Straps are undone and the Pastern Strap is detached from one side on the rear of the Scoot 
2. Pick up the hoof with the sole facing upwards in the trimming position and slip the toe of the hoof into the Scoot, the hoof should slip comfortably into the Scoot
3. Pull the rear of the Scoot over the heel bulbs and place the hoof onto the ground
4. The fit should be snug but not tight 
5. Check the fit of the rear heel bulb strap at the back of the Scoot  by fitting a finger between the strap and the heel bulbs. If you cannot do this, your Scoots are too small. The strap should not be placing any pressure on the heel bulbs
6. Secure the Front Straps on the Scoots by holding the end of the strap and stretching it over the knob hook at an angle and slip the elongated hole over the top or bottom edge of the knob hook. If you have difficulty securing these straps, use a hoof pick or needle-nose pliers
7. Once your straps have been secured they should show an even amount of tension 
8. When the horse is standing upright with its leg at 90 degrees, secure the Pastern Strap around the horse’s pastern. Ensure that the strap is loose enough to be able to place two fingers between the strap and the front of the pastern
9. The strap must be set correctly to function properly - not too loose or too tight. If you cannot place two fingers between the Pastern Strap and the pastern, loosen the Pastern Strap another hole. If the Pastern Strap is too tight the strap will pull the rear of the boot backwards and forwards over the rear of the hoof as the horse’s pastern flexes forward, and cause rubbing. This will not occur if the Pastern Strap is set at the correct length
10. Pick up the hoof and gently twist both ways. The Scoot Boot should not turn on the hoof. If the Scoot feels loose they may be too big 

Go to our Fitting Page or contact our Sizing Team at sizing@scootboots.com if you have any questions or worries about the fit of your Scoots.

When you first receive your Scoot Boots, try them on to check the fit before you ride in them. Boot up on a dry and clean hoof, on a dry, clean and soft surface, such as a large rubber mat or piece of carpet. This will prevent your Scoots from becoming dirty or marked. Only use one Scoot Boot to confirm the sizing for both of your horse’s hooves.

Once you put on your Scoot Boots, check if they are the correct size for your horse. For instructions on how to fit your Scoot Boots, please go to our Frequently Asked Questions Page. 

To check the fit of your new Scoot Boots, you need to:

1. Check the gap at the front of the Scoot. Place your horse’s hoof on the ground and secure the Front Straps. There should be a gap at the front, the size will depend on the shape of the hoof walls
2. Check the wiggle of your Scoots. Lift your horse’s leg with one hand and grab your Scoot firmly with the other and wiggle gently from left to right. If the fit is correct the Scoot will not rotate or move. If there is any rotation, your Scoots are too big 
3. Check the bulb strap at the rear of your Scoots. Place your horse’s hoof on the ground and try slipping one finger between the heel bulb and bulb strap of your Scoot. If the fit is correct, you should be able to do this forcibly. If you are unable to place your finger between the strap, your Scoots are too small
4. Check the space around the periphery of your Scoot. Place your horse’s hoof on the ground and observe the space around the periphery of your Scoots. If the fit is correct, the upper wall of the Scoot should be snug against the upper wall of the hoof 

Go to our Fitting Page or contact our Sizing Team at sizing@scootboots.com if you have any questions or concerns about the fit of your Scoots.

When you first receive your Scoot Boots, try them on to check your sizing before you ride in them. Boot up on a dry and clean hoof, on a dry, clean and soft surface, such as a large rubber mat or piece of carpet. This will prevent your Scoots from becoming dirty or marked.

If your Scoot Boots are too small:

1. You will be unable to fit your finger between the rear heel bulb strap and your horse’s heel bulbs
2. You will have difficulty pulling the heel straps over the bulbs

If you think your Scoot Boots are too small, please contact our Sizing Team at sizing@scootboots.com with pictures of your horse wearing the Scoots. 

Please note that if you return dirty, damaged, scuffed or marked boots, you will incur a fee. For more information, please go to our Shipping & Returns Page. 

Go to our Fitting Page for more information.

When you first receive your Scoot Boots, try them on to check your sizing before you ride in them. Boot up on a dry and clean hoof, on a dry, clean and soft surface, such as a large rubber mat or piece of carpet. This will prevent your Scoots from becoming dirty or marked.

If your Scoot Boots are too large:

1. The front gap of your Scoot will be less than 10mm (3/8”) wide when the Front Straps are secured 
2. Your Scoots will move and rotate when you wiggle them on your horse’s hoof
3. The upper wall of the Scoot will not sit snugly against the wall of the upper hoof

If you think your Scoot Boots are too big, please contact our Sizing Team at sizing@scootboots.com with pictures of your horse wearing the Scoots.

Please note that if you return dirty, damaged, scuffed or marked boots, you will incur a fee. For more information, please go to our Shipping & Returns Page. 

Go to our Fitting Page for more information.

No. If your horse’s hooves are a suitable shape for Scoots and the Scoots are the right size and correctly secured, they should not rotate on the hoof. If your Scoot Boot is rotating or moving on the hoof, you may have a size too big or your horse may require a correct barefoot trim. 

You can check if your Scoot Boots move or rotate on the hoof by using the ‘wiggle test’. Lift your horse’s leg with one hand and grab the Scoot firmly with the other and wiggle gently from left to right. If the Scoot moves or rotates, they are too big.

If you think your Scoot Boots are too big, please contact our Sizing Team at sizing@scootboots.com with pictures of your horse wearing their Scoots.

To check you are securing your Scoots correctly, please go to our Frequently Asked Questions Page. 

Go to our Fitting Page for more information.

If your Scoot Boots twist on your horse’s hoof, your Scoots are either too big or your horse’s hoof shape is unsuitable for Scoots. 

If the twisting is minimal, we recommend you use Scoot Anti-Slip Shims to secure the fit of your Scoot Boots. Anti-Slip Shims are also a great aid when a horse is in between sizes or when conditions are dry and your horse’s hooves have shrunk. 

Contact our Sizing Team at sizing@scootboots.com if the twisting continues.

Go to our Fitting Page for more information.

Sometimes new Scoot Boots have a sleek/shiny surface on the inside. You can remove this with fine sandpaper. 

If your Scoots continue to twist after removing this polish, your Scoots  may be too big. Please contact our Sizing Team at sizing@scootboots.com or go to our Frequently Asked Questions Page.

Go to our Fitting Page for more information.

There are three reasons why your Scoot Boots may be too loose: 

1. The size is too big. A smaller size Scoot Boot should fix this issue. Alternatively, you could snug up the fit of your Scoots with Scoot Anti-Slip Shims
2. Your horse was sized in wet weather conditions which can swell the horse’s hooves from absorption of moisture. In dry weather hooves dry out and shrink, and grow slowly. To fix this issue you can snug up the fit of your Scoot Boots with Scoot Anti-Slip Shims
3. Your Scoot Boots may have stretched. Scoot Boots are just like a new pair of leather riding boots that stretch as they are broken in. Ensure that new Scoots are fitted on the snug side to prevent this from occurring

Contact our Sizing Team at sizing@scootboots.com or go to our Fitting Page for more information.

There are three reasons why your Scoot Boots may be forced open more than what is recommended: 

1. Your horse may need a correct barefoot trim. The toes may be too long, the hoof may be too wide for the boot, or the horse may be at the end of its trimming cycle
2. If the gap is more than 15mm (5/8”) wide after the break-in period, your Scoots may be a size too small. Please go to our Fitting Page to check the fit of your Scoots and contact our Sizing Team at sizing@scootboots.com for help 
3. The walls of your horse’s hooves are too vertical and therefore not suitable for Scoots. Horses with contracted feet usually have vertical hoof walls, as do mules, which prevents them from getting a secure fit in Scoot Boots. Scoot Enduros may be more suitable in these cases

Go to our Fitting Page or contact our Sizing Team at sizing@scootboots.com for more information.

No, the correct sized Scoot Boots should not rub at all. If your Scoots are rubbing you may have the wrong size, the Pastern Strap may not be correctly secured or you may require more protective Gaiters. 

If you are experiencing rubbing, please contact our Sizing Team at sizing@scootboots.com with pictures of your horse wearing their Scoot Boots and one showing where the Scoots have rubbed.

Yes, we recommend you slowly break your horse into new Scoot Boots. Horses have different levels of sensitivity and Scoots may rub if you don’t break them in slowly. 

Do a short ride the first time you use Scoot Boots. No more than 6 kilometres (4 miles). After your first ride the Scoots will mould to the shape of your horse’s hoof. Do this until you are sure that your Scoots are not chafing or rubbing. If there are no issues, gradually increase your riding distance. This will condition and toughen your horse’s skin.

Every new pair of Scoot Boots comes with a complimentary pair of Trail Gaiters. We recommend using these gaiters when conditioning your horse's skin with new Scoot Boots. 

If your horse has extra sensitive skin or you are using Scoot Boots for long-distance and endurance riding, you may require a pair of Endurance Gaiters.

Contact our Sizing Team at sizing@scootboots.com if you have any problems with rubbing.

Yes, you can use wrapping tape on your Scoot Boots. 

Scoot Boots are constructed of thermoplastic urethane (TPU). TPU is a very robust material with high abrasion and shock absorbing qualities, however it is affected by certain chemicals. You must keep your Scoots away from any likely contaminants which will compromise the integrity of your Scoots. 

Please note, we have identified that the widely used equine product ‘VetWrap’ will cause a reaction with the TPU in your Scoot Boots. As a result, ‘VetWrap’ should not be secured to your Scoots. Your warranty will be voided if any damage occurs through the use of this. Go to our Warranty Page for more information.

Scoot Boots require a recent and correct barefoot trim to ensure a secure fit.

A natural, barefoot trim requires:

• Low heels. A barefoot horse does not require excessive heel length
• All flare removed from the hoof walls. A straight edge should be able to be placed from the coronet to the bottom edge of the hoof wall at ground level. There should be no space visible under the straight edge
• The ‘ground-bearing’ surface of the outer hoof wall bevelled. This prevents the hoof wall from chipping away. It also prevents the white line stretching and ensures a neat, strong hoof. The toe is short and rolled at a 45-degree angle to create a good break-over

Go to our Blog Page for more information.

You should trim your horse’s hooves every five to six weeks. When correctly sized, Scoot Boots will fit for an entire five to six week trim cycle. Do not go up a size to allow for growth between trims.

A horse’s hoof growth slows dramatically through the colder and drier months. In summer and winter, you can have increased riding time between trims unless you have a wet summer. Go to our Blog Page for more information about the changes in your horse’s hooves throughout the seasons.

If your horse is sensitive after having a barefoot trim, your barefoot trimmer or farrier may have rasped off the toe callus. 

The toe callus is the area of the sole between the tip of the frog and end of the toe. This area should never be rasped on a barefoot horse. If the toe callus is rasped your horse will become foot-sore. 

Go to our Blog Page for more information.

Shod horses require higher heels because when a metal shoe is placed onto a hoof, the toe of the hoof is immediately lengthened. This results in a slower break-over speed, which in turn increases lever forces on the tendons at the back of the horse’s front legs. To keep a shod horse sound and prevent tendon injuries, keeping a higher heel height temporarily neutralises the lever forces to the tendons.

Barefoot horses require a rolled short-toe so with correct trimming, there are very few lever forces present. As a result the heels can be kept low and maximum contact between the frog and ground can occur. This is not only beneficial to the hoof but the horse’s entire body.

Go to our Blog Page for more information.

No. Due to the shape of mule’s hooves, they are usually not suitable for Scoot Boots.

The walls of a mule’s hoof are too vertical and narrow to match the shape of Scoot Boots.

Scoot Enduros however are suitable for mules. Contact our Sizing Team at sizing@scootboots.com for more information.

Welcome to your barefoot journey! 

Firstly, it is important to realise that there is a big difference between how your horse’s hooves are shaped now, and how they must be shaped to wear hoof boots. The shape of a shod hoof is different from a barefoot hoof that has had regular barefoot trims. A shod hoof has a lot more toe, heel and wall than a naturally trimmed hoof.

Once you have removed your horse’s shoes, you need to contact a knowledgeable barefoot farrier or trimmer and begin having regular barefoot trims every five-six weeks. Once the excess toe, heel and wall have been removed, you can start using hoof boots to provide extra protection and comfort to your horse. 

Go to our Blog Page for more information.

No adjustment is required on theScoot Boots as the boots are secured by the parts of the hoof that do not grow. If the correct sized Scoot is used, the security will come from the upper part of the Scoot Boot and not the Pastern Straps. This means Scoot Boots can fit throughout a five to six-week trimming cycle.

Yes. You can heat stretch Scoot Boots to get a custom fit. 

With some hooves, Scoot Boots can fit perfectly around the periphery of the hoof. If the heel bulb straps are too tight however, too much pressure can be placed on the bulbs. Heat stretching with boiling hot water can fix this issue. To heat stretch your Scoot Boots you need to:

1. Measure up your horse to determine how much to stretch your Scoots 
2. Place the heel bulb strap into boiling hot water for approximately 1 minute until the strap is soft enough to stretch
3. Take the strap out of the water and stretch each side of the strap 
4. Hold the straps in the stretched position until your Scoot cools
5. Dip your Scoot into cold water to ensure it is no longer hot 
6. When the Scoot Boot is cold, try it on the horse and adjust further if needed

Videos on heat stretching with boiling water can be found here. 

Alternatively, you can use a heat gun to evenly heat the heel bulb straps. This is a less safe method and we recommend the use of hot water instead. Be careful not to heat the straps too much as this will burn your Scoots. Videos on heat stretching with a heat gun can be found here. 

The heel straps must be stretched no greater than 5mm (1/4”). This equates to a full boot size. Over-stretching your Scoot Boots will compromise the fit. Heat stretching will also void your warranty. Go to our Warranty Page for more information. 

Contact our Sizing Team at sizing@scootboots.com for more information.

To achieve an optimum fit.

Your horse may have large heel bulbs with maximum digital cushion development making the heel bulb straps in your Scoot Boots extra tight.

 Heat stretching is an option when the smaller size is too snug on the heel bulbs, but the next size up is too loose.

Contact our Sizing Team at sizing@scootboots.com for more information on how to heat stretch your Scoot Boots.

Yes. You can heat stretch your Mud Straps.

To heat stretch your Mud Straps you need to:

1. Place the Mud Straps in very hot water for approximately 1 minute 
2. Take the straps out of the water and stretch both ends 
3. Hold the strap in this position until the strap cools
4. Once the strap is cold, you can use it on your horse

Please note that heat stretching will void your warranty. Go to our Warranty Page for more information. 

Alternatively, you can use a heat gun to evenly heat your Mud Straps. This is a less safe method and we recommend the use of very hot water instead. Move the heat gun up and down the strap approximately 5-10 cm (3-4”) away from the strap on both sides. 

Contact our Sizing Team at sizing@scootboots.com for more information.

There are 7 different sizes of Mud Straps:

Mud Strap Size              Scoot Boot Size

XXS                                  00 and 0

XS                                     1 and 2

S                                       3 and 4

M                                      5 and 6

L                                         7

XL                                      8

XXL                                    9

XXXL                                 10 and 11

Note -  as there are so many variables to the size of a horses upper hoof, you may find the Mud Straps are a size too small. If this is the situation, you can easily extend the length 10mm (3/8") which will be the length of the next size up. Do this by heat stretching. If you have any queries about fit, please send us photos of the strap on the Scoot Boot to sizing@scootboots.com for advice. When you have the perfect fit - you will achieve maximum retention If too big - if the Mud Strap can be pulled down to comfortably reach the coronet band, then your Mud Strap is a size too big and will pull off the hoof with minimum pressure. If too small - if you cannot slip a finger comfortably around the periphery of the Mud Strap, then the Mud Strap is a size too small and will likely cause rubbing.

There are 4 different sizes of Pastern Straps:

Pastern Straps Size                Scoot Boot Size

S                                                 M00 to 00

M                                                0 to 3

L                                                  4 to 9

XL                                               10 to 11

There are 4 different sizes of Anti-Slip Shims:

Anti-Slip Shim Size       Scoot Boot Size 

XS                                    000 to 0

S                                       1 to 3

M                                     4 to 6

L                                       7 to 11

There are 3 different sizes of Trail Gaiters:

Trail Gaiter Size       Scoot Boot Size

S                                 000 to 2

M                               3 to 5

L                                 6 to 11

There are 3 different sizes of Endurance Gaiters: 

Endurance Gaiter Size               Scoot Boot Size

S                                                     0 to 2

M                                                    3 to 5 

L                                                      6 to 11

There are 14 different sizes of Scoot Pads:

Scoot Pad Size       Scoot Boot Size 

000                          000

00                             00

0                                0

1                                 1

2                                2

3                                3

4                                4

5                                5

6                                6

7                                7

8                               8

9                               9

10                             10

11                              11

Scoot Pads are only necessary if your horse has very sensitive soles or is in between sizes. 

The Scoot Boot is made from thermoplastic urethane which has good shock-absorbing qualities. If your horse has healthy and fully transitioned hooves, Scoot Pads will most likely not be required.

You can size your Scoot Skins the same way you size your Scoot Boots!

Scoot Boot offers a Free Sizing Service to all customers. If you use Scoot Boot’s free sizing service and purchase from our online store, we will give you free shipping and free exchange if we size incorrectly!

To take your Sizing Pictures, you need to:

1.      Ensure your horse has had a correct barefoot trim within the last 2 weeks. A barefoot trim requires a rolled toe, bevelled hoof wall, low heel and no flare

2.     Take four pictures of each hoof you want sized up:

i)              First image: Measure from the centre of the toe and down over the frog

ii)            Second image: Measure across the widest part of the hoof

iii)           Third image: Take a clear photo directly in front of the hoof

iv)           Fourth image: Take a clear photo showing the side of the hoof 

3.     Send your sizing pictures to our Scoot Boot Sizing Team by:

i)              Uploading them through our Website

ii)            Emailing them to sizing@scootboots.com

iii)           Messaging them on our Facebook Page

iv)           Sending them to us via live chat on our Website.

Go to our Sizing Page for more information.

We recommend that gluing be undertaken by people who are skilled and experienced in gluing hoof boots. 

To prepare Scoot Skins for gluing:

1. Put on protective eye equipment and latex gloves 
2. Attach a wire brush to a cordless drill and rough up the inside of the Skins until all factory polish has been removed 
3. Clean the inside of the Skins with a rag and methylated spirits  
4. Cut a piece of cloth tape and stick it across the slots on both sides and the opening at the front on the outside of the Skins 

To glue Scoot Skins:

Use a heat gun or hairdryer to dry the hoof

1. Use the back of a rasp to rasp off any oil and dirt off the hoof wall 
2. Use a sanding block to sand off any remaining dirt or oil 
3. Clean off any loose particles from the hoof with a rag and methylated spirits 
4. When the methylated spirits has dried, the hoof is ready for gluing 
5. Place a piece of masking tape over the vents on the outside of the Skins. This allows the glue to penetrate the area and form a plug
6. Check the fit of the prepared Skins on the hoof. It should be snug at the front of the Skins with the toe forward. On the side of the hoof, the Skins should sit below the hairline. On the back of the hoof there should be no excessive overhang of the heel bulbs
7. Mark the centre of the hoof with a pencil so the Skins will be straight and centred when you glue them on 
8. Fit your Adapter into the bottom of the Shufit Glue and put it in the glue applicator
9. Remove the lid of the glue and attach the Mixing Tip
10. Test your glue before putting it in the Skins, it should turn a light grey colour
11. Generously apply the glue to each side, inside the Skins
12. Place your horse’s hoof on a hoof stand 
13. Open the Skins
14. Lift the hoof and place one side of the Skins onto the hoof, and then place the other side onto it
15. Place the hoof back on the hoof stand and smooth out the glue 
16. Wrap the hoof in plastic wrap and hold the hoof above the ground for 2-3 minutes

We recommend Shufit Glue. 

Other adhesive glues may contain chemicals that could contaminate your Scoot Boots and void your warranty. Go to our Warranty Page for more information.

When gluing your Scoot Skins onto your horse’s hooves, we strongly recommend keeping the bottom 15mm (5/8”) of your Skins above the sole glue-free. 

The glue must not get under the sole of the hoof as any lumps of glue are likely to cause bruising.

Go to our Frequently Asked Questions Page or contact our Sizing Team at sizing@scootboots.com for more information.

No. The side vents of your Scoot Skins provide an advantage when gluing.

Place a piece of masking tape over the vents on the outside of your Skins. This allows the glue to penetrate the area and form a plug, which adds to the strength of the glue.

Go to our Frequently Asked Questions Page or contact our Sizing Team at sizing@scootboots.com for more information.

No. 

Many people incorrectly measure the length of their horse’s hoof, stopping at the wrong position on the heels. We therefore encourage you to take advantage of our Free Sizing Service. We will cover all costs to exchange if we size your horse incorrectly.

Go to our Sizing Page, Frequently Asked Questions, or contact our Sizing Team at sizing@scootboots.com for more information.

Scoot Boot offers a Free Sizing Service. If you use this free service, you get free shipping and free exchange if you purchase from us!

To take your Sizing Pictures, you need to:

1.      Ensure your horse has had a correct barefoot trim within the last 2 weeks. A barefoot trim requires a rolled toe, bevelled hoof wall, low heel and no flare

2.     Take four pictures of each hoof you want sized up:

i)              First image: Measure from the centre of the toe and down over the frog

ii)            Second image: Measure across the widest part of the hoof

iii)           Third image: Take a clear photo directly in front of the hoof

iv)           Fourth image: Take a clear photo showing the side of the hoof 

3.     Send your sizing pictures to our Scoot Boot Sizing Team by:

i)              Uploading them through our Website

ii)            Emailing them to sizing@scootboots.com

iii)           Messaging them on our Facebook Page

iv)           Sending them to us via live chat on our Website.

For more information, go to our Sizing Page.  

Absolutely! Scoot Boots are very easy to clean as they are a ‘one-piece’ moulding. There are no ties, cables or velcro. They can simply be hosed off at the end of a ride.

Do not use any chemicals such as copper sulphate, insect spray, or cleaning agents on your Scoots. These may react with the material your Scoots are made of and this will void your warranty. Go to our Warranty Page for more information.

As Scoot Boots are a one-piece moulding, they are super easy and simple to clean. 

To clean Scoot Boots:

1. Hose off any mud, grass or debris 
2. Leave them to dry 
3. Place the Scoots back in their tote bag and store them indoors in a moderate temperature

To clean Scoot Skins:

1. Pick up your horse’s hoof 
2. Carefully lift open the bottom of the toe with a hoof pick
3. Place the nozzle of a hose in the opening of the back of your Skins
4. Ensure the water running into the back of the boot is filtering out the front of your Skins and is flushing out any debris that may have entered
5. Remove the hoof pick

No. You can leave Scoot Skins on for a 5-6 week trimming period without creating hoof health issues. 

Scoot Skins allow the sole to breathe as the design allows air to circulate. This helps prevent a build-up of bacteria or fungus. The soles can also be flushed out and medication can be applied during the 5-6 week setting. 

Go to our Blog Page for more information on hoof health issues.

Scoot Boots are made of thermoplastic urethane which is sensitive to chemicals and extreme hot or cold temperatures. You must store your Scoots in their tote bag and hang them indoors at a moderate temperature.

If Scoots are stored in an air-tight container it can lead to hydrolysis where moisture can penetrate the TPU and break it down. This can also occur if Scoots are unused for long periods of time.

Yes, you can! Every pair of Scoot Boots is sold with spare hardware consisting of rivets, screws and knob hooks.

The tools required for replacement of the hardware on Scoot Boots are:

• A Phillips Head screwdriver (long shaft)
• A regular screwdriver
• A pair of wire cutters
• Thread locking glue

To remove Hardware:

1. Remove the straps from the Scoots
2. Cut the head of the rivet off the front of the Scoots with a pair of wire cutters 
3. Fit the Scoots with 6 knob hooks from the Scoot Boot Hardware Pack and secure them with a small amount of Loctite Glue 
4. Secure the straps back on the new hardware on the Scoots

Please note that Loctite 222, our recommended thread locking glue, may make removal of the screws difficult.

No, you cannot use any hoof oils or greases with Scoot Boots. Oils and greases are not necessary and make the inside of your Scoots slippery. 

A horse’s hoof wall is approximately 70% water. When conditions are dry, moisture evaporates from the hooves and they reduce in size and become dry and brittle. You need to replace the lost moisture with water, not grease or oils.

We have over 400 Scoot Boot stockists globally! 

To find a verified Scoot Boot stockist near you, click on the stockist menu on the top right hand side of our homepage and click Stockist Locator. Enter your city, town, postcode or address in the ‘Find Stores Near You’ box. The closest stockists to your entered location will appear, along with all their contact details. 

For more information about our stockists, please contact us at scootboot@scootboots.com.

Thank you for your interest in becoming a Scoot Boot stockist!

Scroll down to the bottom of our Homepage and click the link ‘Become a Stockist’. This will redirect you to our stockist website. You can then fill out our stockist application.

If the Scoot Boot Team approves your application you will be sent a link to activate an account. 

Go to our Stockist Page for more information.

Contact us at scootboot@scootboots.comto change your order although we are unable to make any changes to your order if it has entered the dispatch process.

To enter a discount code to an order:

1. Add items to the cart and click ‘Checkout’
2. Enter your contact and shipping details 
3. Enter the discount code to the ‘Gift Card or Discount Code’ text box on the right of the screen
4. Click ‘Continue to Shipping’
5. Fill out your shipping and payment information and place your order

Contact us at scootboot@scootboots.com if you have any problems with your discount code.

To use an online Gift Card on your order:

1. Add items to the cart and click ‘Checkout’
2. Enter your contact and shipping details 
3. Enter the number of the Gift Card to the ‘Gift Card or Discount Code’ text box on the right of the screen
4. Click ‘Continue to Shipping’
5. Fill out your shipping and payment information and place your order

Contact us at scootboot@scootboots.com if you have any problems.

This is only available for Australian customers. 

To use Afterpay:

1. Add items to the cart and click ‘Checkout’
2. Enter your contact and shipping details 
3. Proceed to payment and select the preferred payment option 
4. Fill in your account details for your payment option

Contact us at scootboot@scootboots.com if you have any problems.

Please contact us at scootboot@scootboots.com if you want to cancel your order although we are unable to do so if your order has entered the dispatch process.

Yes! We ship Scoot Boots all over the world.

Delivery is 4 to 7 business days worldwide.  

Go to our Shipping Page for more information.

Scoot Boot uses AusPost within Australia. 

Scoot Boot uses either DHL, FedEx or UPS for international orders. 

All Scoot Boot orders are sent via express shipping to ensure your order arrives quickly.

Go to our Shipping Page for more information.

Go to our Homepage and scroll down to the bottom of the page. Click ‘Track My Delivery’. You will be redirected to the Track My Delivery Page. Enter your tracking number in the text box and click ‘Track’. Alternatively, click on the link in your shipping confirmation email.

Contact us at info@scootboots.com if you require any assistance.

We will cover the cost of your shipping if you use our Free Sizing Service!

To use our Free Sizing Service, please go to our Sizing Page.

Go to our Shipping Page for more information.

Yes. We will refund or exchange any goods purchased from our Online Store within 60 days if they are faulty, damaged, the incorrect size or you have changed your mind. 

If you purchased your Scoot Boots and accessories through a stockist, you will be subject to that stockist’s return policy. 

Please note, if your Scoots are returned dirty, marked, scuffed, damaged, or without the accessories bag, you will incur a fee. 

Go to our Shipping & Returns Page for more information.

To return your order:

• Contact sizing@scootboots.com with some front and side on pictures of the boots on the hooves to check sizing
• Submit your returns request on the Returns Page
• Once your request has been approved, send your Scoots with proof of purchase to: 

Scoot Boot Office and Warehouse at Unit 4/205 Kennedy Drive, Cambridge, TAS 7170, Australia 

If you were sized with our free sizing service, please see our Frequently Asked Questions Page for instructions. 

Your Scoots will be assessed when they are received back in our warehouse. Please note, if your items are returned dirty, marked, scuffed, damaged, or without their accessories bag, you will incur a fee.

Please note, all returned items must be:

• In their original condition
• Returned within 60 days of purchase
• Returned with proof of purchase

Failure to do so will result in your exchange or refund being denied. 

Go to our Shipping & Returns Page and our Returns Page for more information.

Scoot Boot offers a 60-day exchange return policy on all items if they are found to be faulty, damaged, the incorrect size, or you have changed your mind and wish to return your Scoot Boots and accessories. 

To exchange an item in your order:

• Contact sizing@scootboots.com with some front and side on pictures of the boots on the hooves if you have an issue with sizing
• Submit your returns request on the Returns Page
• Once your request has been approved, send your items to: 

Scoot Boot Office and Warehouse at Unit 4/205 Kennedy Drive, Cambridge, TAS 7170, Australia 

If your Scoots were sized with our free sizing service, please see our Frequently Asked Questions Page for instructions. 

Once your Scoots have been received back in our warehouse, they will be assessed and your new exchanged products will be sent back to you. Please note, if your items are returned dirty, marked, scuffed, damaged, or without the accessories bag, you will incur a fee.

Please note, all returned  items must be:

• In their original condition
• Returned within 60 days of purchase
• Returned with proof of purchase

Failure to do so will result in your exchange being denied. 

Go to our Shipping & Returns Page and our Returns Page for more information.

If we sized your horse and your Scoots are the incorrect size we will cover the costs of exchange. 

• Contact sizing@scootboots.com with some front and side on pictures of the Scoots on the hooves 
• Submit a returns request on the Returns Page 
• Once your request has been approved, send your Scoots to: 

Scoot Boot Office and Warehouse at Unit 4/205 Kennedy Drive, Cambridge, TAS 7170, Australia 

When your Scoots have been received back in our warehouse, their condition will be assessed and your new Scoots will be sent to you. If your Scoots are returned dirty, marked, scuffed, damaged, or without the accessories bag, you will incur a fee.

Please note, all returned  items must be:

• In their original condition
• Returned within 60 days of purchase

Failure to do so will result in your exchange being denied. 

If we provided sizing advice but your Scoots were purchased elsewhere, we will not pay for costs to exchange. If sizing images are provided of one hoof (and not two) and the size is incorrect for the hoof not depicted in the image, we will not pay the costs to exchange. 

Go to our Shipping & Returns Page and our Returns Page for more information.

If your order does not correspond with what you have received, we will cover the cost to exchange.

To exchange the incorrect order:

• Contact scootboot@scootboots.com with your order number 
• Once your exchange has been approved, send the incorrect items to:

Scoot Boot Office and Warehouse at Unit 4/205 Kennedy Drive, Cambridge, TAS 7170, Australia 

Send your shipping receipt to scootboot@scootboots.com and we will reimburse you 

Once your order has been received back in our warehouse, it will be assessed and your correct order will be sent out to you. Please note, if your incorrect items are returned dirty, marked, scuffed, damaged, or with missing accessories, you will incur a fee. 

Please note, all returned items must be:

• In their original condition
• Returned within 60 days of purchase

Failure to do so will result in your exchange or refund being denied.

Go to our Shipping & Returns Page for more information.

We offer a 90-day warranty on all Scoot Boot products to all Scoot Boot and Scoot Boot Stockist customers under statute and at common law.

You are entitled to a replacement or refund for a major failure,’ and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have your Scoots repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.

You are entitled to a replacement or refund if your Scoot Boot products are not of acceptable quality. You are also entitled to compensation for any reasonably foreseeable loss of damage for a “major failure”.

Go to our Warranty Page for more information.

We offer a warranty period of 90 days from the date of purchase either from Scoot Boot or a Scoot Boot Stockist. 

Go to our Warranty Page for more information.

If you consider that your Scoot Boots are not of acceptable quality, have a latent defect, or are otherwise not compliant with the conditions, warranties, undertakings, and legal rights given to you under statute and common law, you can make a warranty claim within 90 days of purchase.

If you want to make a warranty claim:

• Email us at scootboot@scootboots.com
• State the reason for your claim
• Provide proof of purchase

Go to our Warranty Page for more information.

The Scoot Boot warranty does not extend to loss or damage caused by:

• Normal wear and tear (please refer to our Frequently Asked Questions Page as to the durability of our Scoot Boots)
• Misuse or abusive use of Scoot Boots
• Exposure to abnormally corrosive conditions
• Use of non-standard, incompatible parts
• Repair or modification or other work carried out on your Scoot Boots
• Use of a heat gun to custom fit Scoot Boots
• Using Scoot Boots over metal shoes
• Incorrect sizing (please see our Returns & Exchange Page)
• Defects not notified to us within the 90 day warranty period
• Insertion of studs other than Scoot Boot recommended quick studs

Go to our Warranty Page for more information.

If you believe your Scoot Boots are faulty you can make a warranty claim within 90 days of purchase.

To make a warranty claim:

• Email us at scootboot@scootboots.com
• State the reason for your claim
• Provide proof of purchase

Go to our Warranty Page for more information.

AUS: +61 (03) 6121 4605

UK: +44 330 822 4259

USA: +1 (213) 267 7079

You can contact us any time via email at scootboot@scootboots.com, or via direct message on our Facebook Page ‘Scoot Boots’ or on our Instagram account @scootbootsdownunder.

You can also choose to live chat on our Scoot Boot website! Just click on the blue tab on the bottom right of your screen to chat with a member of our team.

Scoot Boots are manufactured inJakarta, Indonesia.

Our Scoot Boot office and warehouse is located in Tasmania, Australia.

We pack orders every Monday, Wednesday and Friday (excluding Tasmanian public holidays).

Sorry the item that you want to purchase is out of stock. We will have it back in stock very shortly!

You can elect to be notified by email when the item is back in stock.

Just click on the item, size and colour you wish to purchase. Click ‘Email When Available’ and enter your email address.

Yes. You can purchase Scoot Boot Gift Cards from our online store for amounts between $50 and $1,000.